Highly polarized dithiafulvenes: synthesis and nonlinear optical properties

Push-pull dithiafulvenes with reduced bond length alternation (BLA) and high optical nonlinearities have been prepared. The interplay between the proaromaticity of the donor and the structural and optical properties of these merocyanines is discussed. The donor ability of dithiafulvenes can reach that of ferrocene or dialkylaminophenyl groups.     

A telescope illumination system for a wide-field endoscope

Endoscopic illumination systems conduct light down a built-in fibre-optic bundle to illuminate the object. Many modern endoscopes employ wide-field imaging optical systems and therefore require an illuminating beam of large divergence. This is commonly provided by placing a strong diverging lens at the far end of the fibre bundle, but it results in a poor uniformity of illumination in the object space. This paper describes the design of a telescopic illumination system to overcome this problem.     

响应矩阵分析方法在BEPC储存环上的应用

由于储存环中各种元件误差的存在, 机器的实际运行模式与设计模式有一定的偏差. 目前广泛开展的响应矩阵方法研究, 可以分析出磁铁元件以及束流位置测量元件的误差, 使束流基本参数得到校正. 介绍了用响应矩阵分析方法, 在BEPC储存环上进行的局部轨道校正的实验研究, 以及BEPC储存环束流参数校正的模拟研究.     

中高分辨力遥感图像中飞机目标自动识别算法研究

提出了一种中高分辨力的航空航天遥感图像中飞机目标快速自动识别的新算法。在分割和分类过程中充分利用飞机目标的先验知识,提出了一种改进区域分割方法,并应用树分类器对飞机目标进行自动识别。所提出的改进区域分割方法较好地实现了区域分割中阈值的准确自动选取,克服了复杂背景图像中小目标的全局阈值自动分割的失效问题。采用二叉树分类器,通过提取简单的目标几何特征,分层进行种类识别,提高了识别速度,降低了漏检率和虚警率。运用该方法进行了实验。结果表明,识别率达到了100%。     

An improved injector bunching geometry for ATLAS

The bunching system of the ATLAS positive ion injector (PII) has been improved by relocating the harmonic buncher to a point significantly closer to the second stage sine-wave buncher and the injector LINAC. The longitudinal optics design has also been modified and now employs a virtual waist from the harmonic buncher feeding the second stage sine-wave buncher. This geometry improves the handling of space charge for high-current beams, significantly increases the capture fraction into the primary rf bucket and reduces the capture fraction of the unwanted parasitic rf bucket. Total capture and transport through the PII has been demonstrated as high as 80% of the injected dc beam while the population of the parasitic, unwanted rf bucket is typically less than 3% of the total transported beam. To remove this small residual parasitic component a new traveling-wave transmission-line chopper has been developed reducing both transverse and longitudinal emittance growth from the chopping process. This work was supported by the U.S. Department of Energy under contract W-31-109-ENG-38.     

厚胶光刻非线性畸变的校正

利用厚胶光刻技术制作大深度微结构元件是一种有效的途径,但厚胶光刻过程中的非线性畸变对光刻面形质量的严重影响限制了该技术的应用,基于此,提出了一种对掩模透射率函数进行校正的方法。分析空间像形成及其在光刻胶内传递、曝光、显影等过程中非线性因素的影响,利用模拟退火算法对掩模透射率函数进行校正,以提高光刻面形质量,并以凹面柱透镜为例,给出了校正前后的显影轮廓模拟结果,其校正后浮雕面形的体积偏差仅为2.63%。该方法在有效改善面形质量的同时,并没有引起掩模的设计、制作难度及费用增加,这对于设计、制作高质量的微结构元件有重要意义。     

光学系统的等效变换

本文在普遍情况下使用矩阵方法详细讨论了光学系统的等效变换,证明光线变换矩阵为的光学系统当C≠0时可等效为一个薄透镜,当C=0时等效为一个薄透镜组。文中所得结果能用于分析光线或光束通过复杂光学系统的变换和多元件光腔的问题。     

一种适于自适应光学的旋转软刀口波面传感器的研究

利用傅里叶光学理论,证明了一种新型波面传感器——旋转软刀口波面传感器的概念.在经典刀口法的刀口区,以渐变透过率代替突变透过率函数,在光瞳象面上可获得反映光瞳面位置待测波面位相梯度及位相梯度方向的调制信号.文中给出了实验结果和讨论.